Journal of Optimization and Supply Chain Management

Journal of Optimization and Supply Chain Management

A Cross-Organizational Empirical Evaluation of DFMEA Effectiveness in Identifying and Prioritizing Design Risks in Manufacturing Systems

Document Type : Technical Note

Authors
1 Department of Material Engineering, SR.C.IAU, Islamic Azad University, Tehran, Iran
2 Department of Industrial Engineering, SR.C.IAU, Islamic Azad University, Tehran, Iran
Abstract
Objective: Failure Mode and Effects Analysis (FMEA) is a systematic method used to identify potential failure modes, evaluate their effects, and prioritize risks within a system. This study aims to assess design-related risks across multiple organizations using Design Failure Mode and Effects Analysis (DFMEA) and to examine the significance of DFMEA in preventing failures during the design phase.
Methods: DFMEA was conducted in seven organizations to evaluate design-related risks. Potential failure modes were identified and analyzed, and Risk Priority Numbers (RPNs) were calculated to assess and prioritize risks associated with design, safety, process, scheduling, and financial factors.
Results: The analysis revealed numerous risks across all seven organizations. The second organization recorded the highest number of identified risks (29), whereas the fifth organization had the lowest number (6). However, despite having fewer identified risks, the fifth organization exhibited a higher average RPN than the second organization, indicating that the quantity of identified risks does not necessarily reflect overall risk severity. The results further suggest that design failures remain likely in the absence of DFMEA implementation.
Conclusion: This study provides a comparative assessment of design-related risks across multiple organizations using DFMEA and demonstrates the importance of evaluating both the number and severity of risks. The findings highlight the critical role of DFMEA in identifying potential failures early in the design stage and supporting effective risk mitigation strategies.
Keywords
Subjects

Thomas, D. (2025). Rethinking FMEA for Today’s Manufacturing Landscape Considering Innovation in Risk Analysis. Journal of Failure Analysis and Prevention, 25(1), 1-3.
Masudin, I., Syahrial, M. I., Nugraha, A., & Restuputri, D. P. (2025). A Hybrid Life Cycle Assessment and FMEA Framework for Sustainable Risk Evaluation in Wood Veneer Manufacturing. Circular Economy and Sustainability, 1-36.
Liu, C., Li, G., Xiao, W., Liu, J., Tan, L., Li, C., ... & Xue, C. (2024). Reliability analysis of subsea control system using FMEA and FFTA. Scientific Reports, 14(1), 21353.
Panyukov, D. I., Nenashev, M. V., Demoretskii, D. A., & Kozlovskii, V. N. (2024). Organizing FMEA preparations at enterprises. Russian Engineering Research, 44(1), 150-152.
Sharma, K. D., & Srivastava, S. (2018). Failure mode and effect analysis (FMEA) implementation: a literature review. Journal of Advance Research in Aeronautics and Space Science, 5(1), 1-17.
Huang, J., You, J. X., Liu, H. C., & Song, M. S. (2020). Failure mode and effect analysis improvement: A systematic literature review and future research agenda. Reliability Engineering & System Safety, 199, 106885.
Liu, H. C., Liu, L., & Liu, N. (2013). Risk evaluation approaches in failure mode and effects analysis: A literature review. Expert systems with applications, 40(2), 828-838.
Mikulak, R. J., McDermott, R., & Beauregard, M. (2017). The basics of FMEA. CRC press.
Ogunnowo, E. O., Adewoyin, M. A., Fiemotongha, J. E., & Odion, T. (2023). A Conceptual Framework for Reliability-Centered Design of Mechanical Components Using FEA and DFMEA Integration.
Bouti, A., & Kadi, D. A. (1994). A state-of-the-art review of FMEA/FMECA. International Journal of reliability, quality and safety engineering, 1(04), 515-543.
Sellappan, N., Nagarajan, D., & Palanikumar, K. (2015). Evaluation of risk priority number (RPN) in design failure modes and effects analysis (DFMEA) using factor analysis. International Journal of Applied Engineering Research, 10(14), 34194-34198.
Kim, K. O., & Zuo, M. J. (2018). General model for the risk priority number in failure mode and effects analysis. Reliability Engineering & System Safety, 169, 321-329.
Piątkowski, J., & Kamiński, P. (2017). Risk assessment of defect occurrences in engine piston castings by FMEA method. Archives of foundry engineering, 17(3), 107-110.
Boroomand, K., Khanali, T., & Meshkinfar, A. (2023). Failure Modes Analysis System in Casting Parts by Process Failure Mode Effects Analysis (PFMEA) Method. International Journal of Iron & Steel Society of Iran, 19(2), 43-50.
Deepan, S., Raj, S. S., Ponselvan, T. S., Praveenkumar, R., & Alex, J. (2022). Integration of Lean Principles with Fuzzy FMEA in a Small Scale Casting Industry. In Journal of Physics: Conference Series (Vol. 2272, No. 1, p. 012029). IOP Publishing
Chin, K. S., Chan, A., & Yang, J. B. (2008). Development of a fuzzy FMEA based product design system. The International Journal of Advanced Manufacturing Technology, 36, 633–649.
Bowles, J. (2004). An assessment of RPN prioritization in a failure modes effects and criticality
Shebl, N. A., Franklin, B. D., & Barber, N. (2012). Failure mode and effects analysis outputs: are they valid? BMC Health Services Research, 12(1):150.
Liu, H. C., Chen, X. Q., Duan, C. Y., & Wang, Y. M. (2019). Failure mode and effect analysis using multi-criteria decision making methods: A systematic literature review. Computers & Industrial Engineering, 135, 881-897.